BOX-CA - kitchen fans with sound-absorbing, acoustically insulated housing and odor-eliminating carbon filters ≤12000 m³/h

• BOX-CA – kitchen fans with acoustically insulated casing and odor-removing carbon filters with a capacity of up to 12,000 m³/h
• ideal for cleaning and removing odor-saturated air in food service establishments (bars, restaurants, cafés, canteens) or other industrial premises where unpleasant odors and noise are a problem
• the quality of exhaust air and odor removal is ensured by a series of filtration sections installed in the unit:

Primary air filter – G3 class Filtering material: polyester with a waved structure, ensuring efficient airflow and particle retention. Filtration efficiency: gravimetric test according to ASHRAE 52-76 (STD) / EUROVENT 4/5 standards. Efficiency: 84%, corresponds to G3 class. Construction: sturdy frame made of galvanized steel sheet. Polyester material reinforced with galvanized holders, ensuring stability and durability.	High-efficiency pocket filters – EU7 class Usage: single-use, not intended for reuse. Filtering material: non-flammable glass microfibres, fire resistance class 2. Filtration efficiency: gravimetric test according to ASHRAE 52-76 (STD) / EUROVENT 4/5 standards. Efficiency: 80–85%, corresponds to EU7 class.	Cartridges with activated carbon filling High adsorption capacity – effectively absorbs gases and odors. Theoretical density (dry condition): 470 g/l Cylinder diameter: 4 mm Abrasion resistance (according to ASTM standard): 97% Internal surface area: determined by the B.E.T method, relative to benzene – 900 m²/g Ignition temperature: 450 °C

• low fan noise level is ensured by a casing insulated with double acoustic panels
• operating temperature from -15 °C to +50 °C
• installation and access hatch orientation (Dx-A1 standard)

CONSTRUCTION

• frame made of pressed aluminum profiles, removable panels from galvanized steel sheet
• panel insulation filled with self-extinguishing techno-polymer material
• high-quality centrifugal fan, double inlet with forward-curved impeller, connected to the motor by trapezoidal belts and pulleys
• fan and motor mounted on an aluminum profile base, isolated from the structure with anti-vibration supports and a flexible connection element on the outlet, ensuring vibration absorption according to proper weight distribution inside the ventilation unit
• motor installed on a tensionable belt slider for easier maintenance and possible replacement

MOTOR

• three-phase asynchronous motors comply with international standards IEC 60034, IEC 60072, EMC 2014/30 / EU, LVD 2014/35 / EU, CE marked, IP55, class F
• single or dual-speed motors (single-speed motors are controlled by a speed regulator, dual-speed motors by a speed selector)
• corresponds to class S1 (continuous operation with constant load)
• made in Italy
• 2 year warranty

• rain protection cover (for rooftop fan installation)
• speed switch 5IN2033 designed for two-speed (2 SPEED) models

Dimensions

Technical data