Price:
Expanded polypropylene ducts are made of 15 mm EPP: light, strong, noise-damping and needing no extra insulation. Here you will find EPP ducts Ø125, 150 and 180 mm, 45° and 90° bends and couplings – everything for supply and exhaust air runs with a heat recovery unit.
We deliver worldwide. Read on at the bottom of the page.
EPP has better barrier properties than EPE polyethylene, damps noise very well, insulates against heat and prevents condensation. The ducts therefore need no extra insulation, and thermal bridges are eliminated. They are recommended for the exhaust or supply air of heat recovery systems.
Expanded polypropylene ducts with coupling EPP come in Ø125, 150 and 180 mm, 0.5 and 1.0 m long, with a connecting coupling attached. Direction changes use 45° bends with coupling EPP45 and 90° bends with coupling EPP90 (Ø125–180 mm). For extra joints there are duct couplings EPP-MO.
| Parameter | Value |
|---|---|
| Material | expanded polypropylene EPP, 15 mm |
| Diameters | Ø125, 150, 180 mm |
| Length | 0.5 and 1.0 m |
| Thermal conductivity | 0.039 W/mK |
| Tightness class | C |
| Surface roughness | 0.077 mm |
The ducts have a thermal conductivity of 0.039 W/mK, tightness class C and a surface roughness of 0.077 mm, so air moves through them quietly and with little loss. Ducts with a 43 mm wall are available to special order. Standard parts suit connecting a heat recovery unit to indoor and outdoor air openings.
For metal runs there are galvanised steel ducts, for insulated ones insulated galvanised ducts, and for tight spaces flexible ducts. Joints can be sealed with aluminium tape AS256.
el-vent.com offers EPP ducts and fittings for heat recovery systems. We deliver worldwide. If you are unsure about the diameter or parts list, write to us under Contacts and we will help you choose.
EPP ducts come in Ø125, 150 and 180 mm, 0.5 and 1.0 m long, with a connecting coupling attached.
No. The 15 mm EPP insulates against heat, damps noise and prevents condensation, so thermal bridges are eliminated. Ducts with a 43 mm wall are available to special order.
For the exhaust or supply air of heat recovery systems. They are light and strong, so they are easy to install.
45° bends EPP45, 90° bends EPP90 and couplings EPP-MO. The bends come with a coupling.
Thermal conductivity is 0.039 W/mK, tightness class C and surface roughness 0.077 mm.