Price:
Dust extractors, dust collectors and complete dust extraction systems for workshops and factories. Dust extraction fans up to 20000 m³/h carry sawdust, chips and dust through ducts to a cyclone or filter. Ready-made kits already include a filter and collection bags, and sanding dust extractors are also available in a 230 V version.
For explosive dust choose ATEX explosion-proof fans IVWTK EX. Our range covers every wood dust extractor and sawdust extractor need – from compact kits to industrial systems.
A sawdust or chip extractor takes woodworking waste from machines to cyclones or filters. Choose by required airflow (m³/h) and static pressure.
Add up the airflow of all machines working at the same time and allow a margin for duct losses. For wood chips, keep about 18–20 m/s in the duct.
Wood chips and sawdust need an air speed of 18–20 m/s in the duct, otherwise they settle. Required airflow by duct diameter:
Add up the airflow of all machine branches open at the same time and allow a margin for duct losses. Based on the total, choose a W-T transport fan (1950–14000 m³/h), a DNZOT dust collector kit (2600–5700 m³/h) or an explosion-proof IVWTK EX fan (up to 20000 m³/h).
Galvanised ducts SKO Ø250–500 mm, 90° elbows and E600 frequency inverters. Seal joints with adhesive cloth tape.
Both remove wood waste from machines and convey it. Each is a dust extraction fan or a kit with a filter, selected by airflow, pressure, number of machines and duct length.
A transport fan has a centrifugal, self-cleaning impeller designed to convey solid particles together with the air (0.1–0.2 kg/m³ for the W-T series). An ordinary fan is made for clean air and can quickly clog and fail because of particles.
The W-T series is made for shavings and sawdust (12 models, ≤1950–14000 m³/h). For a ready solution with a filter and bags, choose the DNZOT kits (≤5700 m³/h). Choose the exact model by the number of machines and the duct length and diameter, which must be calculated by the designer or your company's technologist. DNZOT and DNZOP kits include a filter and collection bags for separating dust. DNZOT models: 2600, 3500, 4700 and 5700 m³/h.
Add up the airflow of all pick-up points running at once and add a margin for duct losses. For wood chips, about 18–20 m/s duct velocity is normally kept.
W-T, IVWTP, IVWPSW, DNZOT and DNZOP must not be used in explosive atmospheres. For explosive dust there is the IVWTK EX series (≤20000 m³/h), made to the ATEX directive, for zone 21 inside the fan and zone 22 outside it. An EX starter switch is required. Temperature class T1–T3 (T4 on request), explosion group II (IIA and IIB).
70 °C for the W-T series and 60 °C for IVWTP, IVWPSW, DNZOT and DNZOP. IVWTK EX is rated for a maximum ambient temperature of 120 °C. These fans are not suitable for extracting hotter air.
DNZOP kits (720 and 1460 m³/h) with filter and collection bags are made for sanding dust, with a single-phase 230 V version. For low-concentration dust, such as blasting dust or laser cutting fumes, the IVWTP and IVWPSW fans are suitable.
In Lithuania, W-T fans are delivered in 14–21 working days, IVWTP, IVWPSW, DNZOT and DNZOP in 21, and IVWTK EX in 30, plus 14 working days to other countries. The motor has a 12-month warranty. Lead times may change, so check the product page.
Yes. Click "Ask a question about this product" on the product page or write to us stating your airflow and pressure requirements, which bulk materials you will convey and in what environment the fan will operate. We will help you choose the optimal model. You can buy online or in our shop in Kaunas, Taikos pr. 34A.