Price:
Plastic ducts for heat recovery systems make an easy-to-fit run: round and flat ducts, bends, tees, non-return valves and brackets.
We deliver worldwide. Read on at the bottom of the page.
Plastic ducting goes together like a construction set: parts of different sizes connect to each other, and a duct can be cut with a fine-tooth saw. Pick the shape to suit the space and the diameter to suit the unit connection.
Round EKO ducts come in Ø100, 125 and 150 mm, 0.5 to 1.5 m long; the ducts are glossy white PVC and the fittings are ABS. Flat EKO-P ducts (55×110 and 55×220 mm) fit under ceilings or in wall recesses, and the EKO-P-20 transition joins round to flat.
For round ducts there are EKO-21 couplings, EKO-23 bends (15°, 45°, 90°), EKO-26 tees, EKO-29 reducers, EKO-28 brackets and UniClamp universal brackets. EKO-22 and EKO-P-22 non-return valves stop backdraught, and the KON condensate trap collects condensate.
For laboratories, hospitals and the chemical industry there are ChemoTube plastic ducts made of PVC, resistant to organic acids, alkalis and corrosion, performing best at 0…+60 °C. They go with PO45 and PO90 bends, POM couplings, POA end caps, POR dampers, POK roof caps and POP transitions.
| Type | Size | Use |
|---|---|---|
| EKO round | Ø100, 125, 150 mm | general runs |
| EKO-P flat | 55×110, 55×220 mm | narrow spaces |
| ChemoTube | PVC, 0…+60 °C | chemical-resistant runs |
The REC in line and REC vertical units connect with Ø125 mm ducts. For a sturdier main run see galvanised ducts, for flexible branches flexible ducts, and for antibacterial solutions antibacterial ducts.
el-vent.com offers plastic ducts for heat recovery, fittings and accessories. We deliver worldwide. If you are unsure about the system layout, write to us under Contacts and we will help you choose.
Round EKO ducts come in Ø100, 125 and 150 mm. The REC in line and REC vertical units connect at Ø125 mm, so choose that diameter.
The basics are EKO-21 couplings, EKO-23 bends, EKO-26 tees, EKO-29 reducers and EKO-28 brackets.
ChemoTube is made of PVC, resistant to organic acids, alkalis and corrosion, and works best at 0…+60 °C. It is meant for laboratories, hospitals and the chemical industry.