Price:
The Ø63 mm flexible HDPE duct system is made for air distribution: here you will find ducts, diffuser boxes, main manifolds, couplings and rubber gaskets.
We deliver worldwide. Read on at the bottom of the page.
All parts of the system – ducts, boxes, manifolds and couplings – must be Ø63 mm. First work out the number of diffusers, then choose boxes or a manifold and the duct length you need.
Use HDPE63A: an antistatic, antibacterial and anti-mould flexible duct whose inner surface is coated with silver oxide ions. The smooth surface causes low pressure losses, and the duct is supplied in 50 m rolls.
The duct connects to the diffuser through boxes OSA, OSB, OSC, while manifolds OSD, OSG split the air into several branches. The boxes are made of galvanised steel and meet tightness class C under EN 12237; the duct simply slides onto the connector.
Ducts are joined by couplings MO63 with rubber gaskets GTO63.
| Part | Purpose |
|---|---|
| Duct | air routing |
| Boxes | connecting the duct to the diffuser |
| Manifolds | splitting air into branches |
| Couplings and gaskets | joining and sealing ducts |
Systems of other diameters: Ø75 mm system and Ø90 mm system. See the whole system under HDPE duct system.
el-vent.com offers flexible Ø63 mm duct systems, boxes and manifolds. We deliver worldwide. If you are unsure about the system layout, write to us under Contacts and we will help you choose.
The Ø63 mm system consists of the duct HDPE63A, diffuser boxes, main manifolds, couplings and rubber gaskets.
Use HDPE63A: an antistatic, antibacterial and anti-mould flexible duct supplied in 50 m rolls.
The boxes are made of galvanised steel and meet tightness class C under EN 12237. The duct simply slides onto the connector.