Price:
Galvanised steel ducts for heat recovery systems form a sturdy main air line from the unit: ducts Ø80–500 mm, bends, branches, couplings, dampers and non-return valves.
We deliver worldwide. Read on at the bottom of the page.
Galvanised steel suits main runs: the ducts are rigid, airtight and long-lasting. First set the diameter from the unit connection and airflow, then list the parts.
SKO ducts Ø80–200 mm and SKO Ø250–500 mm come in sections from 0.5 to 3 m, standard lengths 1.5 and 3 m. Direction changes use bends without gaskets and with gaskets, and short 90° bends (Ø100–315 mm). Branches use flat branches PA, PAG and BAG, and asymmetric transitions ARG join different diameters.
Ducts join with MO couplings, MOG with rubber gaskets and external MOI. At the unit, flexible couplings MOL (Ø100–315 mm) of galvanised steel and AMT material absorb vibration and cut noise.
RSK and RSKG dampers balance airflow in branches, RSKH dampers meet tightness class 4 under EN 1751, and SEPG work with an electric actuator. AV and AVGI non-return valves block backflow.
| Part | Diameters | Purpose |
|---|---|---|
| SKO | Ø80–500 mm | straight ducts |
| MOG | Ø80–500 mm | couplings with gaskets |
| MOL | Ø100–315 mm | flexible couplings, vibration damping |
| RSKH | Ø100–315 mm | shut-off dampers, class 4 |
| AV | Ø100–400 mm | non-return valves |
The REC in line and REC vertical units use Ø125 mm. For lighter runs see HDPE and flexible ducts, and for insulated versions EPP ducts.
el-vent.com offers galvanised steel ducts for heat recovery, fittings and dampers. We deliver worldwide. If you are unsure about the system layout, write to us under Contacts and we will help you choose.
SKO come in Ø80–500 mm. The REC in line and REC vertical units use Ø125 mm, so start the main run at that diameter.
MOL of galvanised steel and AMT material absorb vibration and cut noise where a duct meets a unit or fan.