Catalog
Catalogue
SEARCH
    • Price:

SEARCH

bulviukose.lt - recipes, salts, mustard, vinegar, syrups, oils

Items on Sale

Tvarkykime atliekas atsakingai

Flexible and insulated ducts for heat recovery

Flexible and insulated ducts for heat recovery – aluminium, stainless steel, antibacterial and insulated ducts for branches and hard-to-reach places, plus clamps and bands.

We deliver worldwide. Read on at the bottom of the page.

How to choose a flexible duct for a heat recovery system

First consider the air temperature, whether insulation is needed and whether the duct stays visible. Then choose the diameter to match the unit connection, and do not forget the fixings: a flexible duct without suitable clamps and bands will not stay airtight.

Aluminium and combined ducts

Flexible aluminium duct AF-FLEX is made of 0.1 mm aluminium strip with a triple lock, so it is airtight and works from −30 °C to +250 °C; it comes in Ø80–315 mm, 1.5 and 3 m. Flexible duct COMBIFLEX is made of multilayer aluminium and PVC film, resists UV and chemicals and works from −30 °C to +120 °C at up to 5000 Pa.

Insulated ducts

When warm or cold air runs through the duct and condensation is unwelcome, choose an insulated duct: ISO-SL (10 m, up to 120 °C) has a 25 mm mineral wool layer. For rigid insulated runs see insulated steel ducts ISKO and EPP ducts.

Antibacterial ducts

For rooms where hygiene matters there are ducts that destroy 99.9% of bacteria: BIOFLEX (10 m, −30…+80 °C, no insulation), BIOISOFLEX80 (25 mm glass wool, up to +80 °C), BIOISOFLEX250 (fire class M0, up to +250 °C) and BIOISOVENT (6 mm rubber insulation, M1, 7.5 m, up to +150 °C). All withstand up to 5000 Pa. See more in antibacterial ducts.

Stainless steel duct and fixing

NF-FLEX of EN 1.4404 / AISI 316L steel works from −30 °C to +500 °C and withstands 2000 Pa and 1000 Pa of vacuum. For fixing use galvanised clamps, galvanised band SJ30, tensioner ST30, stainless tensioner STA30 and stainless band SJA30.

DuctTemperatureFeature
AF-FLEX−30…+250 °CØ80–315 mm, 1.5 and 3 m
COMBIFLEX−30…+120 °Caluminium + PVC, UV resistant
BIOISOFLEX250up to +250 °Cantibacterial, M0
NF-FLEX−30…+500 °C316L steel

The REC in line and REC vertical units connect with Ø125 mm ducts. For a main run see galvanised ducts, and for light runs plastic ducts and HDPE.

Worldwide delivery of flexible ducts for heat recovery

el-vent.com offers flexible and insulated ducts for heat recovery, clamps and bands. We deliver worldwide. If you are unsure about the system layout, write to us under Contacts and we will help you choose.

Frequently asked questions
Which flexible duct suits a heat recovery unit?

Choose by temperature and insulation need: AF-FLEX (up to +250 °C), COMBIFLEX (up to +120 °C) or insulated ISO-SL. The REC in line and REC vertical units connect at Ø125 mm.

When do I need an insulated duct?

When warm or cold air must not condense or lose temperature. ISO-SL has a 25 mm mineral wool layer and works up to 120 °C.

What is special about antibacterial flexible ducts?

BIOFLEX and the insulated BIOISOFLEX80, BIOISOFLEX250 and BIOISOVENT destroy 99.9% of bacteria and withstand up to 5000 Pa.

When is a stainless steel duct needed?

NF-FLEX of 316L steel works from −30 °C to +500 °C and withstands 2000 Pa and 1000 Pa of vacuum – where aluminium is no longer enough.

How do I fix a flexible duct so it stays airtight?

Use galvanised clamps or the stainless band SJA30 with the STA30 tensioner; for the galvanised option, band SJ30 and tensioner ST30.