Price:
The HDPE duct system consists of flexible antibacterial ducts, diffuser boxes, main manifolds and fittings. Here you will find systems of Ø63, Ø75 and Ø90 mm and a flat 132×52 mm system, as well as SPECTRA antibacterial ducts and insulated EPP boxes.
The HDPE system is mostly used with a heat recovery unit: flexible ducts come in coils, so each room can be connected by a separate line without joints. Choose the diameter by airflow and the space available in the construction – Ø63 mm is the slimmest, Ø75 mm the most versatile and Ø90 mm for the largest airflows.
We deliver worldwide. Read on at the bottom of the page.
Choose the system by duct diameter and shape: round Ø63, 75 or 90 mm ducts or the flat 132×52 mm. Each system has its own boxes, manifolds and couplings, so the diameters of ducts, boxes and fittings must match.
HDPE63A, SPECTRA HDPE75 and SPECTRA HDPE90 are antistatic, antibacterial and anti-mould ducts whose inner surface is coated with silver oxide ions; they come in 50 m rolls. The flat system is built on the flexible duct HDPE132/52 (20 m roll, transparent inner part).
The duct connects to the diffuser through boxes OSA, OSB and OSC, while the main manifolds OSD, OSG and OSH split the air into several branches. The boxes are made of galvanised steel and meet tightness class C under EN 12237; the duct simply slides onto the connector. Heat is insulated by the EPP boxes OSPP75 (wall 8–31 mm, λ = 0.039 W/mK).
Ducts are joined by couplings MO63, MO75 and MO90 with rubber gaskets, direction changes use 90° bends A75 and A90, branches use saddle branches EBA, and ends are closed by end caps AKL.
| System | Duct | Category |
|---|---|---|
| Ø63 mm | HDPE63A | Ø63 mm system |
| Ø75 mm | SPECTRA HDPE75 | Ø75 mm system |
| Ø90 mm | SPECTRA HDPE90 | Ø90 mm system |
| 132×52 mm | HDPE132/52 | flat system |
If you only need ducts, see flexible HDPE ducts. For hygiene-critical solutions see antibacterial ducts.
el-vent.com offers flexible HDPE duct systems, diffuser boxes and manifolds. We deliver worldwide. If you are unsure about the system layout, write to us under Contacts and we will help you choose.
They are antistatic, antibacterial and anti-mould, and the inner surface is coated with silver oxide ions. The smooth surface causes low pressure losses, and the rolls are 50 m long.
Slide the duct onto the box connector or coupling MO75. Rubber gaskets GTO75 ensure tightness. Bends A75 change direction.
Yes. OSPP75 are made of EPP with a thermal conductivity of λ = 0.039 W/mK and a wall thickness of 8–31 mm; the profiled inner part reduces pressure losses.