- E-STYLE MINI PRO small diameter bath exhaust fans are designed for direct extraction of air from kitchens, baths and other extremely humid areas
- thanks to the axial impeller, they extract large volumes of air through ducts from Ø92 mm and duct systems up to 3 m in length
- suitable for ceiling or wall mounting
- models:
- BASE - basic
- T - with timer, timer principle: the fan will always run when switched on and when switched off it will operate for a time period set by the timer (from 3 to 25 min.) and then switch itself off
- MHY SMART - with intelligent humidity sensor and timer
1. When connected with three wires (live line, neutral, and an additional line via switch)
When the switch is turned on, the fan will start and operate at maximum speed. When the switch is turned off, the fan will continue running for the time set by the timer and then turn off. However, if the humidity level in the room increases and exceeds the set threshold after the switch is turned off, the fan will automatically turn on and its speed will increase depending on the humidity level. As the humidity decreases, the speed will automatically reduce. Once the humidity level drops below the set threshold, the fan will turn off
2. When connected with two wires (live line and neutral), without a separate switch
If the humidity level in the room increases and exceeds the set threshold, the fan will automatically turn on and its speed will increase depending on the humidity level. As the humidity decreases, the speed will automatically reduce. Once the humidity level drops below the set threshold, the fan will turn off
- maximum ambient temperature 40 °C
- complies with ErP Directive 2009/125/EC and EU Regulation 1253/2014
- 5 years warranty
- installation examples:
ceiling

wall

Brand:
ELICENT
| Code |
Motor |
IP |
m³/h |
l/s |
Pa |
W |
dB(A)* |
kg |
| E-STYLE MINI PRO 90 |
AC |
X4 |
80 |
22 |
23 |
10 |
30.1 |
0.4 |
*LpA, measured at 3 m in open field 230V-50 Hz
Pressure loss curves
