Centrifugal bathroom fans FLUX

• FLUX centrifugal fans for direct extraction of air from kitchens, baths, other extremely humid areas
• the centrifugal impeller generates high pressures and blows extremely high volumes of air through Ø100-120 mm ducts and more complex duct systems up to 15 m long
• suitable for ceiling or wall mounting
• with non-return valve
• with a durable, easy-to-wash protective filter
• the filter can be washed under the crane with plain soap
• B/B - motor with bearings
• models:

- BASE - basic
- SELV - 12 V motor ( for this model it is necessary to order and connect the unit via transformer 2TR2041)
- SELV T - with timer, 12 V motor ( for this model it is necessary to order and to connect the unit via transformer 2TR2041), timer principle: the fan will always run when switched on and when switched off it will operate for a time period set by the timer (3 to 25 min.) and will switch off itself
- PC - with pull cord
- T - with timer, timer operating principle: the fan will always run when switched on and when switched off will affect the timer for a set period of time (3 to 25 min.) and will switch itself off
- MHT - with humidity sensor and timer: the fan will always run when switched on and when switched off will affect the timer for a set period of time (3 to 25 min.) and will switch off by itself, when the humidity level in the room rises to a set level it will automatically switch on for the time set by the timer, or until the humidity level drops below the set level, the humidity sensor is adjustable from 40% to 80%
- 2 V MHT - two-speed, with timer and humidity sensor: the fan runs continuously at a low speed, switching on the switch will activate the maximum speed, and switching off will affect the timer for a period of time set by the timer and will switch back to the minimum speed. If the humidity level rises above the set point, the fan will automatically switch itself to maximum speed and operate for a timed period. If the humidity level drops below the set point then the fan will switch to minimum speed, if the humidity level remains above the set point the fan will run at maximum speed for another cycle. The number of cycles is unlimited until the humidity level falls below the set point.
- 2 V - two-speed (fan runs continuously at low speed, switches to maximum speed when switched on, switches back to low speed when switched off)

• maximum ambient temperature 40 °C
• complies with ErP Directive 2009/125/EC and EU Regulation 1253/2014
• Made in Italy
• 5 years warranty
• installation examples: